A connection to the AC network for energy production or consumption that uses power electronics rather than rotating machines.
No Additional PropertiesPointer to AssetInfo object
Pointer to AssetInfo object
Must match regular expression:^AssetInfo::'(.+)'$
Pointer to PowerTransformerInfo object
Must match regular expression:^PowerTransformerInfo::'(.+)'$
Pointer to WireInfo object
Must match regular expression:^WireInfo::'(.+)'$
Pointer to SwitchInfo object
Must match regular expression:^SwitchInfo::'(.+)'$
Pointer to ShuntCompensatorInfo object
Must match regular expression:^ShuntCompensatorInfo::'(.+)'$
Pointer to WireAssemblyInfo object
Must match regular expression:^WireAssemblyInfo::'(.+)'$
Pointer to TransformerEndInfo object
Must match regular expression:^TransformerEndInfo::'(.+)'$
Pointer to TapChangerInfo object
Must match regular expression:^TapChangerInfo::'(.+)'$
Pointer to WireSpacingInfo object
Must match regular expression:^WireSpacingInfo::'(.+)'$
Pointer to TransformerTankInfo object
Must match regular expression:^TransformerTankInfo::'(.+)'$
Pointer to CableInfo object
Must match regular expression:^CableInfo::'(.+)'$
Pointer to OverheadWireInfo object
Must match regular expression:^OverheadWireInfo::'(.+)'$
Pointer to ConcentricNeutralCableInfo object
Must match regular expression:^ConcentricNeutralCableInfo::'(.+)'$
Pointer to TapeShieldCableInfo object
Must match regular expression:^TapeShieldCableInfo::'(.+)'$
Pointers to GenericAction objects
No Additional ItemsPointer to GenericAction object
Pointer to Location object
Pointer to Location object
Must match regular expression:^Location::'(.+)'$
Pointer to ProposedSiteLocation object
Must match regular expression:^ProposedSiteLocation::'(.+)'$
The type of phase connection, such as wye or delta.
No Additional Propertiesnan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to JumperAction object
Must match regular expression:^JumperAction::'(.+)'$
Array of Terminal objects
No Additional ItemsAn AC electrical connection point to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes.
No Additional PropertiesPointers to OperationalLimitSet objects
No Additional ItemsPointer to OperationalLimitSet object
Array of SvPowerFlow objects
No Additional ItemsState variable for power flow. Load convention is used for flow direction. This means flow out from the TopologicalNode into the equipment is positive.
No Additional PropertiesThe active power flow. Load sign convention is used, i.e. positive sign means flow out from a TopologicalNode (bus) into the conducting equipment.
No Additional Propertiesnan
nan
nan
The individual phase of the flow. If unspecified, then assumed to be balanced among phases.
The reactive power flow. Load sign convention is used, i.e. positive sign means flow out from a TopologicalNode (bus) into the conducting equipment.
No Additional Propertiesnan
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to Circuit object
Must match regular expression:^Circuit::'(.+)'$
Pointer to ConnectivityNode object
Must match regular expression:^ConnectivityNode::'(.+)'$
Pointer to TopologicalNode object
Must match regular expression:^TopologicalNode::'(.+)'$
The connected status is related to a bus-branch model and the topological node to terminal relation. True implies the terminal is connected to the related topological node and false implies it is not.
In a bus-branch model, the connected status is used to tell if equipment is disconnected without having to change the connectivity described by the topological node to terminal relation. A valid case is that conducting equipment can be connected in one end and open in the other. In particular for an AC line segment, where the reactive line charging can be significant, this is a relevant case.
Represents the normal network phasing condition. If the attribute is missing, three phases (ABC) shall be assumed, except for terminals of grounding classes (specializations of EarthFaultCompensator, GroundDisconnector, and Ground) which will be assumed to be N. Therefore, phase code ABCN is explicitly declared when needed, e.g. for star point grounding equipment.
The phase code on terminals connecting same ConnectivityNode or same TopologicalNode as well as for equipment between two terminals shall be consistent.
The orientation of the terminal connections for a multiple terminal conducting equipment. The sequence numbering starts with 1 and additional terminals should follow in increasing order. The first terminal is the "starting point" for a two terminal branch.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to BaseVoltage object
Must match regular expression:^BaseVoltage::'(.+)'$
Pointer to GroundAction object
Must match regular expression:^GroundAction::'(.+)'$
Array of SvStatus objects
No Additional ItemsState variable for status.
No Additional PropertiesThe in service status as a result of topology processing. It indicates if the equipment is considered as energized by the power flow. It reflects if the equipment is connected within a solvable island. It does not necessarily reflect whether or not the island was solved by the power flow.
The individual phase status. If the attribute is unspecified, then three phase model is assumed.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
nan
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The name is any free human readable and possibly non unique text naming the object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to Curve object
Pointer to Curve object
Must match regular expression:^Curve::'(.+)'$
Pointer to RampRateCurve object
Must match regular expression:^RampRateCurve::'(.+)'$
Pointer to DispatchCurve object
Must match regular expression:^DispatchCurve::'(.+)'$
Pointer to CustomProtectionCurve object
Must match regular expression:^CustomProtectionCurve::'(.+)'$
Pointer to StartUpTimeCurve object
Must match regular expression:^StartUpTimeCurve::'(.+)'$
Pointer to EmissionCurve object
Must match regular expression:^EmissionCurve::'(.+)'$
Pointer to VsCapabilityCurve object
Must match regular expression:^VsCapabilityCurve::'(.+)'$
Pointer to StartUpCostCurve object
Must match regular expression:^StartUpCostCurve::'(.+)'$
Pointer to HeatRateCurve object
Must match regular expression:^HeatRateCurve::'(.+)'$
Pointer to ReactiveCapabilityCurve object
Must match regular expression:^ReactiveCapabilityCurve::'(.+)'$
Pointer to FuelCostCurve object
Must match regular expression:^FuelCostCurve::'(.+)'$
Pointer to GenUnitOpCostCurve object
Must match regular expression:^GenUnitOpCostCurve::'(.+)'$
Pointer to ShutdownCurve object
Must match regular expression:^ShutdownCurve::'(.+)'$
Pointer to StartRampCurve object
Must match regular expression:^StartRampCurve::'(.+)'$
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to Curve object
Same definition as VoltVarWattControlMode.VoltVarWattControlCurvenan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to Curve object
Same definition as VoltVarWattControlMode.VoltVarWattControlCurvenan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to Curve object
Same definition as VoltVarWattControlMode.VoltVarWattControlCurvenan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
nan
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Operating mode followed by PowerElectronicsConnection.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Array of PowerElectronicsUnit objects
No Additional ItemsA generating unit or battery or aggregation that connects to the AC network using power electronics rather than rotating machines.
A generating unit or battery or aggregation that connects to the AC network using power electronics rather than rotating machines.
No Additional PropertiesAn electrochemical energy storage device.
No Additional PropertiesPointer to AssetInfo object
Same definition as PowerSystemResource.AssetDatasheetPointers to GenericAction objects
Same definition as PowerSystemResource.GenericActionPointer to Location object
Same definition as PowerSystemResource.Locationnan
No Additional PropertiesNormally 0 to 100 on a defined base.
nan
nan
nan
No Additional PropertiesNormally 0 to 100 on a defined base.
nan
nan
nan
No Additional Propertiesnan
nan
nan
nan
No Additional Propertiesnan
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to Curve object
Same definition as VoltVarWattControlMode.VoltVarWattControlCurvenan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to ProducerCostFunction object
Must match regular expression:^ProducerCostFunction::'(.+)'$
Pointers to OperationalLimitSet objects
Same definition as ACDCTerminal.OperationalLimitSetFull energy storage capacity of the battery. The attribute shall be a positive value.
No Additional Propertiesnan
nan
nan
Amount of energy currently stored. The attribute shall be a positive value or zero and lower than BatteryUnit.ratedE.
No Additional Propertiesnan
nan
nan
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Maximum active power limit. This is the maximum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Minimum active power limit. This is the minimum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
The current state of the battery (charging, full, etc.).
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
A photovoltaic device or an aggregation of such devices.
No Additional PropertiesPointer to AssetInfo object
Same definition as PowerSystemResource.AssetDatasheetPointers to GenericAction objects
Same definition as PowerSystemResource.GenericActionPointer to Location object
Same definition as PowerSystemResource.LocationPointer to Curve object
Same definition as VoltVarWattControlMode.VoltVarWattControlCurvePointer to ProducerCostFunction object
Must match regular expression:^ProducerCostFunction::'(.+)'$
Pointers to OperationalLimitSet objects
Same definition as ACDCTerminal.OperationalLimitSetThe aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Maximum active power limit. This is the maximum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Minimum active power limit. This is the minimum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
A wind generating unit that connects to the AC network with power electronics rather than rotating machines or an aggregation of such units.
No Additional PropertiesPointer to AssetInfo object
Same definition as PowerSystemResource.AssetDatasheetPointers to GenericAction objects
Same definition as PowerSystemResource.GenericActionPointer to Location object
Same definition as PowerSystemResource.LocationPointer to Curve object
Same definition as VoltVarWattControlMode.VoltVarWattControlCurvePointer to ProducerCostFunction object
Must match regular expression:^ProducerCostFunction::'(.+)'$
Pointers to OperationalLimitSet objects
Same definition as ACDCTerminal.OperationalLimitSetThe aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Maximum active power limit. This is the maximum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Minimum active power limit. This is the minimum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to AssetInfo object
Same definition as PowerSystemResource.AssetDatasheetPointers to GenericAction objects
Same definition as PowerSystemResource.GenericActionPointer to Location object
Same definition as PowerSystemResource.LocationPointer to ProducerCostFunction object
Must match regular expression:^ProducerCostFunction::'(.+)'$
Pointers to OperationalLimitSet objects
Same definition as ACDCTerminal.OperationalLimitSetFull energy storage capacity of the battery. The attribute shall be a positive value.
No Additional Propertiesnan
nan
nan
Amount of energy currently stored. The attribute shall be a positive value or zero and lower than BatteryUnit.ratedE.
No Additional Propertiesnan
nan
nan
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Maximum active power limit. This is the maximum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Minimum active power limit. This is the minimum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
The current state of the battery (charging, full, etc.).
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
A photovoltaic device or an aggregation of such devices.
Same definition as PhotoVoltaicUnitA wind generating unit that connects to the AC network with power electronics rather than rotating machines or an aggregation of such units.
Same definition as PowerElectronicsWindUnitPointer to ProducerCostFunction object
Must match regular expression:^ProducerCostFunction::'(.+)'$
Pointers to OperationalLimitSet objects
No Additional ItemsPointer to OperationalLimitSet object
Array of PowerElectronicsConnectionPhase objects
No Additional ItemsA single phase of a power electronics connection.
No Additional PropertiesPhase of this energy producer component. If the energy producer is wye connected, the connection is from the indicated phase to the central ground or neutral point. If the energy producer is delta connected, the phase indicates an energy producer connected from the indicated phase to the next logical non-neutral phase.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Active power injection. Load sign convention is used, i.e. positive sign means flow into the equipment from the network.
No Additional Propertiesnan
nan
nan
Reactive power injection. Load sign convention is used, i.e. positive sign means flow into the equipment from the network.
No Additional Propertiesnan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Array of CurveData objects
No Additional ItemsMulti-purpose data points for defining a curve. The use of this generic class is discouraged if a more specific class can be used to specify the X and Y axis values along with their specific data types.
No Additional PropertiesThe data value of the X-axis variable, depending on the X-axis units.
The data value of the first Y-axis variable, depending on the Y-axis units.
The data value of the second Y-axis variable (if present), depending on the Y-axis units.
The data value of the third Y-axis variable (if present), depending on the Y-axis units.
Type of calculation basis used to define the default bid segment curve.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The style or shape of the curve.
Multiplier for X-axis.
The X-axis units of measure.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Multiplier for Y1-axis.
The Y1-axis units of measure.
Multiplier for Y2-axis.
Multiplier for Y3-axis.
The Y3-axis units of measure.
The Y2-axis units of measure.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Protection standard that the PowerElectronicsConnection follows.
Positive sequence k-factor with units dI/dV. Possible range [2, 10]. Default = 2.
Negative sequence k-factor with units dI/dV. Possible range [2, 10]. Default = 2.
Negative sequence percentage voltage deadband for voltage. Usual range [-10%, 10%]. Default = 10.
No Additional PropertiesNormally 0 to 100 on a defined base.
nan
nan
Positive sequence percentage voltage deadband for voltage. Usual range [-10%, 10%]. Default = 10.
No Additional PropertiesNormally 0 to 100 on a defined base.
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Protection standard that the PowerElectronicsConnection follows.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Positive sequence k-factor with units dI/dV, and possible range [2, 10]. Default = 2.
No Additional PropertiesProtection standard that the PowerElectronicsConnection follows.
Positive sequence k-factor with units dI/dV. Possible range [2, 10]. Default = 2.
Negative sequence k-factor with units dI/dV. Possible range [2, 10]. Default = 2.
Negative sequence percentage voltage deadband for voltage. Usual range [-10%, 10%]. Default = 10.
No Additional PropertiesNormally 0 to 100 on a defined base.
nan
nan
Positive sequence percentage voltage deadband for voltage. Usual range [-10%, 10%]. Default = 10.
No Additional PropertiesNormally 0 to 100 on a defined base.
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointers to OperationalLimitSet objects
Same definition as ACDCTerminal.OperationalLimitSetUsed in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
Specifies the regulation status of the equipment. True is regulating, false is not regulating.
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Maximum fault current this device will contribute, in per-unit of rated current, before the converter protection will trip or bypass.
No Additional Propertiesnan
nan
nan
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Maximum reactive power limit. This is the maximum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Minimum reactive power limit for the unit. This is the minimum (nameplate) limit for the unit.
No Additional Propertiesnan
nan
nan
Active power injection. Load sign convention is used, i.e. positive sign means flow out from a node.
Starting value for a steady state solution.
nan
nan
nan
Reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node.
Starting value for a steady state solution.
nan
nan
nan
Equivalent resistance (RG) of generator. RG is considered for the calculation of all currents, except for the calculation of the peak current ip. Used for short circuit data exchange according to IEC 60909.
No Additional Propertiesnan
nan
nan
Zero sequence resistance of the synchronous machine.
No Additional Propertiesnan
nan
nan
Nameplate apparent power rating for the unit.
The attribute shall have a positive value.
nan
nan
nan
Rated voltage (nameplate data, Ur in IEC 60909-0). It is primarily used for short circuit data exchange according to IEC 60909.
The attribute shall be a positive value.
nan
nan
nan
Negative sequence Thevenin resistance.
No Additional Propertiesnan
nan
nan
Positive sequence Thevenin reactance.
No Additional Propertiesnan
nan
nan
Zero sequence Thevenin reactance.
No Additional Propertiesnan
nan
nan
Negative sequence Thevenin reactance.
No Additional Propertiesnan
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.