A linear shunt compensator has banks or sections with equal admittance values.
No Additional PropertiesPointer to AssetInfo object
Pointer to AssetInfo object
Must match regular expression:^AssetInfo::'(.+)'$
Pointer to PowerTransformerInfo object
Must match regular expression:^PowerTransformerInfo::'(.+)'$
Pointer to WireInfo object
Must match regular expression:^WireInfo::'(.+)'$
Pointer to SwitchInfo object
Must match regular expression:^SwitchInfo::'(.+)'$
Pointer to ShuntCompensatorInfo object
Must match regular expression:^ShuntCompensatorInfo::'(.+)'$
Pointer to WireAssemblyInfo object
Must match regular expression:^WireAssemblyInfo::'(.+)'$
Pointer to TransformerEndInfo object
Must match regular expression:^TransformerEndInfo::'(.+)'$
Pointer to TapChangerInfo object
Must match regular expression:^TapChangerInfo::'(.+)'$
Pointer to WireSpacingInfo object
Must match regular expression:^WireSpacingInfo::'(.+)'$
Pointer to TransformerTankInfo object
Must match regular expression:^TransformerTankInfo::'(.+)'$
Pointer to CableInfo object
Must match regular expression:^CableInfo::'(.+)'$
Pointer to OverheadWireInfo object
Must match regular expression:^OverheadWireInfo::'(.+)'$
Pointer to ConcentricNeutralCableInfo object
Must match regular expression:^ConcentricNeutralCableInfo::'(.+)'$
Pointer to TapeShieldCableInfo object
Must match regular expression:^TapeShieldCableInfo::'(.+)'$
Pointers to GenericAction objects
No Additional ItemsPointer to GenericAction object
Pointer to Location object
Pointer to Location object
Must match regular expression:^Location::'(.+)'$
Pointer to ProposedSiteLocation object
Must match regular expression:^ProposedSiteLocation::'(.+)'$
The type of phase connection, such as wye or delta.
No Additional Propertiesnan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to JumperAction object
Must match regular expression:^JumperAction::'(.+)'$
Array of Terminal objects
No Additional ItemsAn AC electrical connection point to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes.
No Additional PropertiesPointers to OperationalLimitSet objects
No Additional ItemsPointer to OperationalLimitSet object
Array of SvPowerFlow objects
No Additional ItemsState variable for power flow. Load convention is used for flow direction. This means flow out from the TopologicalNode into the equipment is positive.
No Additional PropertiesThe active power flow. Load sign convention is used, i.e. positive sign means flow out from a TopologicalNode (bus) into the conducting equipment.
No Additional Propertiesnan
nan
nan
The individual phase of the flow. If unspecified, then assumed to be balanced among phases.
The reactive power flow. Load sign convention is used, i.e. positive sign means flow out from a TopologicalNode (bus) into the conducting equipment.
No Additional Propertiesnan
nan
nan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to Circuit object
Must match regular expression:^Circuit::'(.+)'$
Pointer to ConnectivityNode object
Must match regular expression:^ConnectivityNode::'(.+)'$
Pointer to TopologicalNode object
Must match regular expression:^TopologicalNode::'(.+)'$
The connected status is related to a bus-branch model and the topological node to terminal relation. True implies the terminal is connected to the related topological node and false implies it is not.
In a bus-branch model, the connected status is used to tell if equipment is disconnected without having to change the connectivity described by the topological node to terminal relation. A valid case is that conducting equipment can be connected in one end and open in the other. In particular for an AC line segment, where the reactive line charging can be significant, this is a relevant case.
Represents the normal network phasing condition. If the attribute is missing, three phases (ABC) shall be assumed, except for terminals of grounding classes (specializations of EarthFaultCompensator, GroundDisconnector, and Ground) which will be assumed to be N. Therefore, phase code ABCN is explicitly declared when needed, e.g. for star point grounding equipment.
The phase code on terminals connecting same ConnectivityNode or same TopologicalNode as well as for equipment between two terminals shall be consistent.
The orientation of the terminal connections for a multiple terminal conducting equipment. The sequence numbering starts with 1 and additional terminals should follow in increasing order. The first terminal is the "starting point" for a two terminal branch.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Pointer to BaseVoltage object
Must match regular expression:^BaseVoltage::'(.+)'$
Pointer to GroundAction object
Must match regular expression:^GroundAction::'(.+)'$
Array of SvStatus objects
No Additional ItemsState variable for status.
No Additional PropertiesThe in service status as a result of topology processing. It indicates if the equipment is considered as energized by the power flow. It reflects if the equipment is connected within a solvable island. It does not necessarily reflect whether or not the island was solved by the power flow.
The individual phase status. If the attribute is unspecified, then three phase model is assumed.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to ShuntCompensatorAction object
Must match regular expression:^ShuntCompensatorAction::'(.+)'$
Array of LinearShuntCompensatorPhase objects
No Additional ItemsA per phase linear shunt compensator has banks or sections with equal admittance values.
No Additional PropertiesThe maximum number of sections that may be switched in for this phase.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
For the capacitor phase, the normal number of sections switched in. The value shall be between zero and ShuntCompensatorPhase.maximumSections.
Phase of this shunt compensator component. If the shunt compensator is wye connected, the connection is from the indicated phase to the central ground or neutral point. If the shunt compensator is delta connected, the phase indicates a shunt compensator connected from the indicated phase to the next logical non-neutral phase.
Shunt compensator sections in use. Starting value for steady state solution. The attribute shall be a positive value or zero. Non integer values are allowed to support continuous variables. The reasons for continuous value are to support study cases where no discrete shunt compensators has yet been designed, a solutions where a narrow voltage band force the sections to oscillate or accommodate for a continuous solution as input.
For LinearShuntConpensator the value shall be between zero and ShuntCompensatorPhase.maximumSections. At value zero the shunt compensator conductance and admittance is zero. Linear interpolation of conductance and admittance between the previous and next integer section is applied in case of non-integer values.
For NonlinearShuntCompensator-s shall only be set to one of the NonlinearShuntCompenstorPhasePoint.sectionNumber. There is no interpolation between NonlinearShuntCompenstorPhasePoint-s.
Conductance per section for this phase if shunt compensator is wye connected. Conductance per section phase to phase if shunt compensator is delta connected.
Susceptance per section of the phase if shunt compensator is wye connected. Susceptance per section phase to phase if shunt compensator is delta connected.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Array of SvShuntCompensatorSections objects
No Additional ItemsState variable for the number of sections in service for a shunt compensator.
No Additional PropertiesThe number of sections in service as a continuous variable. The attribute shall be a positive value or zero. To get integer value scale with ShuntCompensator.bPerSection.
The terminal phase at which the connection is applied. If missing, the injection is assumed to be balanced among non-neutral phases.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointers to OperationalLimitSet objects
Same definition as ACDCTerminal.OperationalLimitSetUsed in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
Specifies the regulation status of the equipment. True is regulating, false is not regulating.
Zero sequence shunt (charging) susceptance per section.
Shunt compensator sections in use. Starting value for steady state solution. The attribute shall be a positive value or zero. Non integer values are allowed to support continuous variables. The reasons for continuous value are to support study cases where no discrete shunt compensators has yet been designed, a solutions where a narrow voltage band force the sections to oscillate or accommodate for a continuous solution as input.
For LinearShuntConpensator the value shall be between zero and ShuntCompensator.maximumSections. At value zero the shunt compensator conductance and admittance is zero. Linear interpolation of conductance and admittance between the previous and next integer section is applied in case of non-integer values.
For NonlinearShuntCompensator-s shall only be set to one of the NonlinearShuntCompenstorPoint.sectionNumber. There is no interpolation between NonlinearShuntCompenstorPoint-s.
Positive sequence shunt (charging) susceptance per section.
Zero sequence shunt (charging) conductance per section.
Positive sequence shunt (charging) conductance per section.
An automatic voltage regulation delay (AVRDelay) which is the time delay from a change in voltage to when the capacitor is allowed to change state. This filters out temporary changes in voltage.
Used for Yn and Zn connections. True if the neutral is solidly grounded.
The maximum number of sections that may be switched in.
The voltage at which the nominal reactive power may be calculated. This should normally be within 10% of the voltage at which the capacitor is connected to the network.
The normal number of sections switched in. The value shall be between zero and ShuntCompensator.maximumSections.
The type of phase connection, such as wye or delta.
The switch on count since the capacitor count was last reset or initialized.
The date and time when the capacitor bank was last switched on.
Voltage sensitivity required for the device to regulate the bus voltage, in voltage/reactive power.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.