A rotating machine whose shaft rotates asynchronously with the electrical field. Also known as an induction machine with no external connection to the rotor windings, e.g. squirrel-cage induction machine.
No Additional Propertiesnan
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Pointer to Location object
Must match regular expression:^Location::'(.+)'$
Pointer to SwitchingAction object
Must match regular expression:^SwitchingAction::'(.+)'$
Array of Terminal objects
No Additional ItemsAn AC electrical connection point to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes.
No Additional PropertiesPointer to ConnectivityNode object
Must match regular expression:^ConnectivityNode::'(.+)'$
The connected status is related to a bus-branch model and the topological node to terminal relation. True implies the terminal is connected to the related topological node and false implies it is not.
In a bus-branch model, the connected status is used to tell if equipment is disconnected without having to change the connectivity described by the topological node to terminal relation. A valid case is that conducting equipment can be connected in one end and open in the other. In particular for an AC line segment, where the reactive line charging can be significant, this is a relevant case.
Represents the normal network phasing condition. If the attribute is missing, three phases (ABC) shall be assumed, except for terminals of grounding classes (specializations of EarthFaultCompensator, GroundDisconnector, and Ground) which will be assumed to be N. Therefore, phase code ABCN is explicitly declared when needed, e.g. for star point grounding equipment.
The phase code on terminals connecting same ConnectivityNode or same TopologicalNode as well as for equipment between two terminals shall be consistent.
The orientation of the terminal connections for a multiple terminal conducting equipment. The sequence numbering starts with 1 and additional terminals should follow in increasing order. The first terminal is the "starting point" for a two terminal branch.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
A single or set of synchronous machines for converting mechanical power into alternating-current power. For example, individual machines within a set may be defined for scheduling purposes while a single control signal is derived for the set. In this case there would be a GeneratingUnit for each member of the set and an additional GeneratingUnit corresponding to the set.
A single or set of synchronous machines for converting mechanical power into alternating-current power. For example, individual machines within a set may be defined for scheduling purposes while a single control signal is derived for the set. In this case there would be a GeneratingUnit for each member of the set and an additional GeneratingUnit corresponding to the set.
No Additional PropertiesThe generating unit's Operator-approved current operating schedule (or plan), typically produced with the aid of unit commitment type analyses. The X-axis represents absolute time. The Y1-axis represents the status (0=off-line and unavailable: 1=available: 2=must run: 3=must run at fixed power value: etc.). The Y2-axis represents the must run fixed power value where required.
No Additional PropertiesThe aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The time between each pair of subsequent regular time points in sequence order.
nan
nan
Time, in seconds
The time for the first time point. The value can be a time of day, not a specific date.
Value1 units of measure.
Multiplier for value2.
Value2 units of measure.
Multiplier for value1.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The time for the last time point. The value can be a time of day, not a specific date.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Array of GenUnitOpCostCurve objects
No Additional ItemsRelationship between unit operating cost (Y-axis) and unit output active power (X-axis). The operating cost curve for thermal units is derived from heat input and fuel costs. The operating cost curve for hydro units is derived from water flow rates and equivalent water costs.
No Additional PropertiesFlag is set to true when output is expressed in net active power.
The style or shape of the curve.
Multiplier for X-axis.
The X-axis units of measure.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Multiplier for Y1-axis.
The Y1-axis units of measure.
Multiplier for Y2-axis.
Multiplier for Y3-axis.
The Y3-axis units of measure.
The Y2-axis units of measure.
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Governor motor position limit.
nan
nan
nan
Governor Speed Changer Droop. This is the change in generator power output divided by the change in frequency normalized by the nominal power of the generator and the nominal frequency and expressed in percent and negated. A positive value of speed change droop provides additional generator output upon a drop in frequency.
Normally 0 to 100 on a defined base.
nan
nan
High limit for secondary (AGC) control.
nan
nan
nan
Default initial active power which is used to store a powerflow result for the initial active power for this unit in this network configuration.
nan
nan
nan
Generating unit long term economic participation factor.
Low limit for secondary (AGC) control.
nan
nan
nan
The normal maximum rate the generating unit active power output can be lowered by control actions.
nan
nan
nan
Maximum high economic active power limit, that should not exceed the maximum operating active power limit.
nan
nan
nan
Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.
nan
nan
nan
This is the maximum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Low economic active power limit that shall be greater than or equal to the minimum operating active power limit.
nan
nan
nan
Minimum time interval between unit shutdown and startup.
nan
nan
Time, in seconds
This is the minimum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Detail level of the generator model data.
nan
nan
nan
The nominal power of the generating unit. Used to give precise meaning to percentage based attributes such as the governor speed change droop (governorSCD attribute).
The attribute shall be a positive value equal to or less than RotatingMachine.ratedS.
nan
nan
nan
Generating unit economic participation factor. The sum of the participation factors across generating units does not have to sum to one. It is used for representing distributed slack participation factor. The attribute shall be a positive value or zero.
Defined as: 1 / ( 1 - Incremental Transmission Loss); with the Incremental Transmission Loss expressed as a plus or minus value. The typical range of penalty factors is (0.9 to 1.1).
The normal maximum rate the generating unit active power output can be raised by control actions.
nan
nan
nan
The unit's gross rated maximum capacity (book value).
The attribute shall be a positive value.
nan
nan
nan
The gross rated minimum generation level which the unit can safely operate at while delivering power to the transmission grid.
The attribute shall be a positive value.
nan
nan
nan
The net rated maximum capacity determined by subtracting the auxiliary power used to operate the internal plant machinery from the rated gross maximum capacity.
The attribute shall be a positive value.
nan
nan
nan
Generating unit short term economic participation factor.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The initial startup cost incurred for each start of the GeneratingUnit.
nan
nan
nan
Time it takes to get the unit on-line, from the time that the prime mover mechanical power is applied.
nan
nan
Time, in seconds
Generating unit economic participation factor.
The variable cost component of production per unit of ActivePower.
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
Energy conversion capability for generating.
The equivalent cost of water that drives the hydro turbine.
nan
nan
nan
Type of turbine.
The height water drops from the reservoir mid-point to the turbine.
nan
nan
nan
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The efficiency of the unit in converting the fuel into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Operating and maintenance cost for the thermal unit.
nan
nan
nan
The kind of wind generating unit.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The planned unused capacity (spinning reserve) which can be used to support emergency load.
nan
nan
nan
The planned unused capacity which can be used to support automatic control overruns.
nan
nan
nan
For dispatchable units, this value represents the economic active power basepoint, for units that are not dispatchable, this value represents the fixed generation value. The value shall be between the operating low and high limits.
nan
nan
nan
Unit control error deadband. When a unit's desired active power change is less than this deadband, then no control pulses will be sent to the unit.
nan
nan
nan
Pulse high limit which is the largest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Pulse low limit which is the smallest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Unit response rate which specifies the active power change for a control pulse of one second in the most responsive loading level of the unit.
nan
nan
nan
The efficiency of the unit in converting mechanical energy, from the prime mover, into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
The unit control mode.
The source of controls for a generating unit. Defines the control status of the generating unit.
A generating unit whose prime mover is a hydraulic turbine (e.g., Francis, Pelton, Kaplan).
No Additional PropertiesThe generating unit's Operator-approved current operating schedule (or plan), typically produced with the aid of unit commitment type analyses. The X-axis represents absolute time. The Y1-axis represents the status (0=off-line and unavailable: 1=available: 2=must run: 3=must run at fixed power value: etc.). The Y2-axis represents the must run fixed power value where required.
Same definition as GeneratingUnit.GenUnitOpScheduleArray of GenUnitOpCostCurve objects
Same definition as GeneratingUnit.GenUnitOpCostCurvesGovernor motor position limit.
nan
nan
nan
Governor Speed Changer Droop. This is the change in generator power output divided by the change in frequency normalized by the nominal power of the generator and the nominal frequency and expressed in percent and negated. A positive value of speed change droop provides additional generator output upon a drop in frequency.
Normally 0 to 100 on a defined base.
nan
nan
Type of turbine.
The height water drops from the reservoir mid-point to the turbine.
nan
nan
nan
High limit for secondary (AGC) control.
nan
nan
nan
Low limit for secondary (AGC) control.
nan
nan
nan
Generating unit long term economic participation factor.
Maximum high economic active power limit, that should not exceed the maximum operating active power limit.
nan
nan
nan
Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.
nan
nan
nan
This is the maximum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Default initial active power which is used to store a powerflow result for the initial active power for this unit in this network configuration.
nan
nan
nan
Minimum time interval between unit shutdown and startup.
nan
nan
Time, in seconds
This is the minimum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Detail level of the generator model data.
nan
nan
nan
The nominal power of the generating unit. Used to give precise meaning to percentage based attributes such as the governor speed change droop (governorSCD attribute).
The attribute shall be a positive value equal to or less than RotatingMachine.ratedS.
nan
nan
nan
Generating unit economic participation factor. The sum of the participation factors across generating units does not have to sum to one. It is used for representing distributed slack participation factor. The attribute shall be a positive value or zero.
Defined as: 1 / ( 1 - Incremental Transmission Loss); with the Incremental Transmission Loss expressed as a plus or minus value. The typical range of penalty factors is (0.9 to 1.1).
The normal maximum rate the generating unit active power output can be raised by control actions.
nan
nan
nan
The unit's gross rated maximum capacity (book value).
The attribute shall be a positive value.
nan
nan
nan
The gross rated minimum generation level which the unit can safely operate at while delivering power to the transmission grid.
The attribute shall be a positive value.
nan
nan
nan
The net rated maximum capacity determined by subtracting the auxiliary power used to operate the internal plant machinery from the rated gross maximum capacity.
The attribute shall be a positive value.
nan
nan
nan
The normal maximum rate the generating unit active power output can be lowered by control actions.
nan
nan
nan
Generating unit short term economic participation factor.
The initial startup cost incurred for each start of the GeneratingUnit.
nan
nan
nan
Time it takes to get the unit on-line, from the time that the prime mover mechanical power is applied.
nan
nan
Time, in seconds
Generating unit economic participation factor.
The variable cost component of production per unit of ActivePower.
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
Energy conversion capability for generating.
The equivalent cost of water that drives the hydro turbine.
nan
nan
nan
Low economic active power limit that shall be greater than or equal to the minimum operating active power limit.
nan
nan
nan
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The efficiency of the unit in converting the fuel into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The planned unused capacity (spinning reserve) which can be used to support emergency load.
nan
nan
nan
The planned unused capacity which can be used to support automatic control overruns.
nan
nan
nan
For dispatchable units, this value represents the economic active power basepoint, for units that are not dispatchable, this value represents the fixed generation value. The value shall be between the operating low and high limits.
nan
nan
nan
Unit control error deadband. When a unit's desired active power change is less than this deadband, then no control pulses will be sent to the unit.
nan
nan
nan
Pulse high limit which is the largest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Pulse low limit which is the smallest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Unit response rate which specifies the active power change for a control pulse of one second in the most responsive loading level of the unit.
nan
nan
nan
The efficiency of the unit in converting mechanical energy, from the prime mover, into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
The unit control mode.
The source of controls for a generating unit. Defines the control status of the generating unit.
A solar thermal generating unit, connected to the grid by means of a rotating machine. This class does not represent photovoltaic (PV) generation.
No Additional PropertiesThe generating unit's Operator-approved current operating schedule (or plan), typically produced with the aid of unit commitment type analyses. The X-axis represents absolute time. The Y1-axis represents the status (0=off-line and unavailable: 1=available: 2=must run: 3=must run at fixed power value: etc.). The Y2-axis represents the must run fixed power value where required.
Same definition as GeneratingUnit.GenUnitOpScheduleArray of GenUnitOpCostCurve objects
Same definition as GeneratingUnit.GenUnitOpCostCurvesGovernor motor position limit.
nan
nan
nan
Governor Speed Changer Droop. This is the change in generator power output divided by the change in frequency normalized by the nominal power of the generator and the nominal frequency and expressed in percent and negated. A positive value of speed change droop provides additional generator output upon a drop in frequency.
Normally 0 to 100 on a defined base.
nan
nan
High limit for secondary (AGC) control.
nan
nan
nan
Default initial active power which is used to store a powerflow result for the initial active power for this unit in this network configuration.
nan
nan
nan
Generating unit long term economic participation factor.
Low limit for secondary (AGC) control.
nan
nan
nan
The normal maximum rate the generating unit active power output can be lowered by control actions.
nan
nan
nan
Maximum high economic active power limit, that should not exceed the maximum operating active power limit.
nan
nan
nan
Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.
nan
nan
nan
This is the maximum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Low economic active power limit that shall be greater than or equal to the minimum operating active power limit.
nan
nan
nan
Minimum time interval between unit shutdown and startup.
nan
nan
Time, in seconds
This is the minimum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Detail level of the generator model data.
nan
nan
nan
The nominal power of the generating unit. Used to give precise meaning to percentage based attributes such as the governor speed change droop (governorSCD attribute).
The attribute shall be a positive value equal to or less than RotatingMachine.ratedS.
nan
nan
nan
Generating unit economic participation factor. The sum of the participation factors across generating units does not have to sum to one. It is used for representing distributed slack participation factor. The attribute shall be a positive value or zero.
Defined as: 1 / ( 1 - Incremental Transmission Loss); with the Incremental Transmission Loss expressed as a plus or minus value. The typical range of penalty factors is (0.9 to 1.1).
The normal maximum rate the generating unit active power output can be raised by control actions.
nan
nan
nan
The unit's gross rated maximum capacity (book value).
The attribute shall be a positive value.
nan
nan
nan
The gross rated minimum generation level which the unit can safely operate at while delivering power to the transmission grid.
The attribute shall be a positive value.
nan
nan
nan
The net rated maximum capacity determined by subtracting the auxiliary power used to operate the internal plant machinery from the rated gross maximum capacity.
The attribute shall be a positive value.
nan
nan
nan
Generating unit short term economic participation factor.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The initial startup cost incurred for each start of the GeneratingUnit.
nan
nan
nan
Time it takes to get the unit on-line, from the time that the prime mover mechanical power is applied.
nan
nan
Time, in seconds
Generating unit economic participation factor.
The variable cost component of production per unit of ActivePower.
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The efficiency of the unit in converting the fuel into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The planned unused capacity (spinning reserve) which can be used to support emergency load.
nan
nan
nan
The planned unused capacity which can be used to support automatic control overruns.
nan
nan
nan
For dispatchable units, this value represents the economic active power basepoint, for units that are not dispatchable, this value represents the fixed generation value. The value shall be between the operating low and high limits.
nan
nan
nan
Unit control error deadband. When a unit's desired active power change is less than this deadband, then no control pulses will be sent to the unit.
nan
nan
nan
Pulse high limit which is the largest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Pulse low limit which is the smallest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Unit response rate which specifies the active power change for a control pulse of one second in the most responsive loading level of the unit.
nan
nan
nan
The efficiency of the unit in converting mechanical energy, from the prime mover, into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
The unit control mode.
The source of controls for a generating unit. Defines the control status of the generating unit.
A nuclear generating unit.
No Additional PropertiesThe generating unit's Operator-approved current operating schedule (or plan), typically produced with the aid of unit commitment type analyses. The X-axis represents absolute time. The Y1-axis represents the status (0=off-line and unavailable: 1=available: 2=must run: 3=must run at fixed power value: etc.). The Y2-axis represents the must run fixed power value where required.
Same definition as GeneratingUnit.GenUnitOpScheduleArray of GenUnitOpCostCurve objects
Same definition as GeneratingUnit.GenUnitOpCostCurvesGovernor motor position limit.
nan
nan
nan
Governor Speed Changer Droop. This is the change in generator power output divided by the change in frequency normalized by the nominal power of the generator and the nominal frequency and expressed in percent and negated. A positive value of speed change droop provides additional generator output upon a drop in frequency.
Normally 0 to 100 on a defined base.
nan
nan
High limit for secondary (AGC) control.
nan
nan
nan
Default initial active power which is used to store a powerflow result for the initial active power for this unit in this network configuration.
nan
nan
nan
Generating unit long term economic participation factor.
Low limit for secondary (AGC) control.
nan
nan
nan
The normal maximum rate the generating unit active power output can be lowered by control actions.
nan
nan
nan
Maximum high economic active power limit, that should not exceed the maximum operating active power limit.
nan
nan
nan
Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.
nan
nan
nan
This is the maximum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Low economic active power limit that shall be greater than or equal to the minimum operating active power limit.
nan
nan
nan
Minimum time interval between unit shutdown and startup.
nan
nan
Time, in seconds
This is the minimum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Detail level of the generator model data.
nan
nan
nan
The nominal power of the generating unit. Used to give precise meaning to percentage based attributes such as the governor speed change droop (governorSCD attribute).
The attribute shall be a positive value equal to or less than RotatingMachine.ratedS.
nan
nan
nan
Generating unit economic participation factor. The sum of the participation factors across generating units does not have to sum to one. It is used for representing distributed slack participation factor. The attribute shall be a positive value or zero.
Defined as: 1 / ( 1 - Incremental Transmission Loss); with the Incremental Transmission Loss expressed as a plus or minus value. The typical range of penalty factors is (0.9 to 1.1).
The normal maximum rate the generating unit active power output can be raised by control actions.
nan
nan
nan
The unit's gross rated maximum capacity (book value).
The attribute shall be a positive value.
nan
nan
nan
The gross rated minimum generation level which the unit can safely operate at while delivering power to the transmission grid.
The attribute shall be a positive value.
nan
nan
nan
The net rated maximum capacity determined by subtracting the auxiliary power used to operate the internal plant machinery from the rated gross maximum capacity.
The attribute shall be a positive value.
nan
nan
nan
Generating unit short term economic participation factor.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The initial startup cost incurred for each start of the GeneratingUnit.
nan
nan
nan
Time it takes to get the unit on-line, from the time that the prime mover mechanical power is applied.
nan
nan
Time, in seconds
Generating unit economic participation factor.
The variable cost component of production per unit of ActivePower.
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The efficiency of the unit in converting the fuel into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The planned unused capacity (spinning reserve) which can be used to support emergency load.
nan
nan
nan
The planned unused capacity which can be used to support automatic control overruns.
nan
nan
nan
For dispatchable units, this value represents the economic active power basepoint, for units that are not dispatchable, this value represents the fixed generation value. The value shall be between the operating low and high limits.
nan
nan
nan
Unit control error deadband. When a unit's desired active power change is less than this deadband, then no control pulses will be sent to the unit.
nan
nan
nan
Pulse high limit which is the largest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Pulse low limit which is the smallest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Unit response rate which specifies the active power change for a control pulse of one second in the most responsive loading level of the unit.
nan
nan
nan
The efficiency of the unit in converting mechanical energy, from the prime mover, into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
The unit control mode.
The source of controls for a generating unit. Defines the control status of the generating unit.
A wind driven generating unit, connected to the grid by means of a rotating machine. May be used to represent a single turbine or an aggregation.
No Additional PropertiesThe generating unit's Operator-approved current operating schedule (or plan), typically produced with the aid of unit commitment type analyses. The X-axis represents absolute time. The Y1-axis represents the status (0=off-line and unavailable: 1=available: 2=must run: 3=must run at fixed power value: etc.). The Y2-axis represents the must run fixed power value where required.
Same definition as GeneratingUnit.GenUnitOpScheduleArray of GenUnitOpCostCurve objects
Same definition as GeneratingUnit.GenUnitOpCostCurvesGovernor motor position limit.
nan
nan
nan
Governor Speed Changer Droop. This is the change in generator power output divided by the change in frequency normalized by the nominal power of the generator and the nominal frequency and expressed in percent and negated. A positive value of speed change droop provides additional generator output upon a drop in frequency.
Normally 0 to 100 on a defined base.
nan
nan
High limit for secondary (AGC) control.
nan
nan
nan
Default initial active power which is used to store a powerflow result for the initial active power for this unit in this network configuration.
nan
nan
nan
Generating unit long term economic participation factor.
Low limit for secondary (AGC) control.
nan
nan
nan
The normal maximum rate the generating unit active power output can be lowered by control actions.
nan
nan
nan
Maximum high economic active power limit, that should not exceed the maximum operating active power limit.
nan
nan
nan
Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.
nan
nan
nan
This is the maximum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Low economic active power limit that shall be greater than or equal to the minimum operating active power limit.
nan
nan
nan
Minimum time interval between unit shutdown and startup.
nan
nan
Time, in seconds
This is the minimum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Detail level of the generator model data.
nan
nan
nan
The nominal power of the generating unit. Used to give precise meaning to percentage based attributes such as the governor speed change droop (governorSCD attribute).
The attribute shall be a positive value equal to or less than RotatingMachine.ratedS.
nan
nan
nan
Generating unit economic participation factor. The sum of the participation factors across generating units does not have to sum to one. It is used for representing distributed slack participation factor. The attribute shall be a positive value or zero.
Defined as: 1 / ( 1 - Incremental Transmission Loss); with the Incremental Transmission Loss expressed as a plus or minus value. The typical range of penalty factors is (0.9 to 1.1).
The normal maximum rate the generating unit active power output can be raised by control actions.
nan
nan
nan
The unit's gross rated maximum capacity (book value).
The attribute shall be a positive value.
nan
nan
nan
The gross rated minimum generation level which the unit can safely operate at while delivering power to the transmission grid.
The attribute shall be a positive value.
nan
nan
nan
The net rated maximum capacity determined by subtracting the auxiliary power used to operate the internal plant machinery from the rated gross maximum capacity.
The attribute shall be a positive value.
nan
nan
nan
Generating unit short term economic participation factor.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The initial startup cost incurred for each start of the GeneratingUnit.
nan
nan
nan
Time it takes to get the unit on-line, from the time that the prime mover mechanical power is applied.
nan
nan
Time, in seconds
Generating unit economic participation factor.
The variable cost component of production per unit of ActivePower.
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The efficiency of the unit in converting the fuel into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The kind of wind generating unit.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The planned unused capacity (spinning reserve) which can be used to support emergency load.
nan
nan
nan
The planned unused capacity which can be used to support automatic control overruns.
nan
nan
nan
For dispatchable units, this value represents the economic active power basepoint, for units that are not dispatchable, this value represents the fixed generation value. The value shall be between the operating low and high limits.
nan
nan
nan
Unit control error deadband. When a unit's desired active power change is less than this deadband, then no control pulses will be sent to the unit.
nan
nan
nan
Pulse high limit which is the largest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Pulse low limit which is the smallest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Unit response rate which specifies the active power change for a control pulse of one second in the most responsive loading level of the unit.
nan
nan
nan
The efficiency of the unit in converting mechanical energy, from the prime mover, into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
The unit control mode.
The source of controls for a generating unit. Defines the control status of the generating unit.
A generating unit whose prime mover could be a steam turbine, combustion turbine, or diesel engine.
No Additional PropertiesThe generating unit's Operator-approved current operating schedule (or plan), typically produced with the aid of unit commitment type analyses. The X-axis represents absolute time. The Y1-axis represents the status (0=off-line and unavailable: 1=available: 2=must run: 3=must run at fixed power value: etc.). The Y2-axis represents the must run fixed power value where required.
Same definition as GeneratingUnit.GenUnitOpScheduleArray of GenUnitOpCostCurve objects
Same definition as GeneratingUnit.GenUnitOpCostCurvesGovernor motor position limit.
nan
nan
nan
Governor Speed Changer Droop. This is the change in generator power output divided by the change in frequency normalized by the nominal power of the generator and the nominal frequency and expressed in percent and negated. A positive value of speed change droop provides additional generator output upon a drop in frequency.
Normally 0 to 100 on a defined base.
nan
nan
High limit for secondary (AGC) control.
nan
nan
nan
Default initial active power which is used to store a powerflow result for the initial active power for this unit in this network configuration.
nan
nan
nan
Generating unit long term economic participation factor.
Low limit for secondary (AGC) control.
nan
nan
nan
The normal maximum rate the generating unit active power output can be lowered by control actions.
nan
nan
nan
Maximum high economic active power limit, that should not exceed the maximum operating active power limit.
nan
nan
nan
Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.
nan
nan
nan
This is the maximum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Low economic active power limit that shall be greater than or equal to the minimum operating active power limit.
nan
nan
nan
Minimum time interval between unit shutdown and startup.
nan
nan
Time, in seconds
This is the minimum operating active power limit the dispatcher can enter for this unit.
nan
nan
nan
Detail level of the generator model data.
nan
nan
nan
The nominal power of the generating unit. Used to give precise meaning to percentage based attributes such as the governor speed change droop (governorSCD attribute).
The attribute shall be a positive value equal to or less than RotatingMachine.ratedS.
nan
nan
nan
Generating unit economic participation factor. The sum of the participation factors across generating units does not have to sum to one. It is used for representing distributed slack participation factor. The attribute shall be a positive value or zero.
Defined as: 1 / ( 1 - Incremental Transmission Loss); with the Incremental Transmission Loss expressed as a plus or minus value. The typical range of penalty factors is (0.9 to 1.1).
The normal maximum rate the generating unit active power output can be raised by control actions.
nan
nan
nan
The unit's gross rated maximum capacity (book value).
The attribute shall be a positive value.
nan
nan
nan
The gross rated minimum generation level which the unit can safely operate at while delivering power to the transmission grid.
The attribute shall be a positive value.
nan
nan
nan
The net rated maximum capacity determined by subtracting the auxiliary power used to operate the internal plant machinery from the rated gross maximum capacity.
The attribute shall be a positive value.
nan
nan
nan
Generating unit short term economic participation factor.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The initial startup cost incurred for each start of the GeneratingUnit.
nan
nan
nan
Time it takes to get the unit on-line, from the time that the prime mover mechanical power is applied.
nan
nan
Time, in seconds
Generating unit economic participation factor.
The variable cost component of production per unit of ActivePower.
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
The efficiency of the unit in converting the fuel into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Operating and maintenance cost for the thermal unit.
nan
nan
nan
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
The planned unused capacity (spinning reserve) which can be used to support emergency load.
nan
nan
nan
The planned unused capacity which can be used to support automatic control overruns.
nan
nan
nan
For dispatchable units, this value represents the economic active power basepoint, for units that are not dispatchable, this value represents the fixed generation value. The value shall be between the operating low and high limits.
nan
nan
nan
Unit control error deadband. When a unit's desired active power change is less than this deadband, then no control pulses will be sent to the unit.
nan
nan
nan
Pulse high limit which is the largest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Pulse low limit which is the smallest control pulse that the unit can respond to.
nan
nan
Time, in seconds
Unit response rate which specifies the active power change for a control pulse of one second in the most responsive loading level of the unit.
nan
nan
nan
The efficiency of the unit in converting mechanical energy, from the prime mover, into electrical energy.
Normally 0 to 100 on a defined base.
nan
nan
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
The unit control mode.
The source of controls for a generating unit. Defines the control status of the generating unit.
Pointer to BaseVoltage object
Must match regular expression:^BaseVoltage::'(.+)'$
Array of SvStatus objects
No Additional ItemsState variable for status.
No Additional PropertiesThe in service status as a result of topology processing. It indicates if the equipment is considered as energized by the power flow. It reflects if the equipment is connected within a solvable island. It does not necessarily reflect whether or not the island was solved by the power flow.
The individual phase status. If the attribute is unspecified, then three phase model is assumed.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
Indicates whether the machine is a converter fed drive. Used for short circuit data exchange according to IEC 60909.
Efficiency of the asynchronous machine at nominal operation as a percentage. Indicator for converter drive motors. Used for short circuit data exchange according to IEC 60909.
Normally 0 to 100 on a defined base.
nan
nan
Ratio of locked-rotor current to the rated current of the motor (Ia/Ir). Used for short circuit data exchange according to IEC 60909.
Nameplate data indicates if the machine is 50 Hz or 60 Hz.
nan
nan
nan
Nameplate data. Depends on the slip and number of pole pairs.
nan
nan
nan
Number of pole pairs of stator. Used for short circuit data exchange according to IEC 60909.
Rated mechanical power (Pr in IEC 60909-0). Used for short circuit data exchange according to IEC 60909.
nan
nan
nan
Indicates for converter drive motors if the power can be reversible. Used for short circuit data exchange according to IEC 60909.
Damper 1 winding resistance.
nan
nan
nan
Damper 2 winding resistance.
nan
nan
nan
Locked rotor ratio (R/X). Used for short circuit data exchange according to IEC 60909.
Transient rotor time constant (greater than tppo).
nan
nan
Time, in seconds
Sub-transient rotor time constant (greater than 0).
nan
nan
Time, in seconds
Damper 1 winding leakage reactance.
nan
nan
nan
Damper 2 winding leakage reactance.
nan
nan
nan
Magnetizing reactance.
nan
nan
nan
Transient reactance (unsaturated) (greater than or equal to xpp).
nan
nan
nan
Sub-transient reactance (unsaturated).
nan
nan
nan
Synchronous reactance (greater than xp).
nan
nan
nan
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
Specifies the regulation status of the equipment. True is regulating, false is not regulating.
Power factor (nameplate data). It is primarily used for short circuit data exchange according to IEC 60909. The attribute cannot be a negative value.
Nameplate apparent power rating for the unit.
The attribute shall have a positive value.
nan
nan
nan
Rated voltage (nameplate data, Ur in IEC 60909-0). It is primarily used for short circuit data exchange according to IEC 60909.
The attribute shall be a positive value.
nan
nan
nan
Active power injection. Load sign convention is used, i.e. positive sign means flow out from a node.
Starting value for a steady state solution.
nan
nan
nan
Reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node.
Starting value for a steady state solution.
nan
nan
nan
The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine.
The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.
The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.
Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Indicates the type of Asynchronous Machine (motor or generator).
Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.
Used in RAVENS Schema to identify the corresponding CIM Object Type of the JSON object.
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
The name is any free human readable and possibly non unique text naming the object.