TapChangerInfo

Type: object

Tap changer data.

root TapChangerInfo.highStep
Type: integer

Highest possible tap step position, advance from neutral.

root IdentifiedObject.description
Type: string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

root TapChangerInfo.ctRating
Type: object or number

Built-in current transformer primary rating.

root TapChangerInfo.ctRating multiplier
Type: enum (of string) Default: "none"

nan

Must be one of:

  • "p"
  • "n"
  • "micro"
  • "m"
  • "c"
  • "d"
  • "k"
  • "M"
  • "G"
  • "T"
  • "none"
  • "y"
  • "z"
  • "a"
  • "f"
  • "da"
  • "h"
  • "P"
  • "E"
  • "Z"
  • "Y"

root TapChangerInfo.ctRating unit
Type: enum (of string) Default: "A"

nan

Must be one of:

  • "none"
  • "m"
  • "kg"
  • "s"
  • "A"
  • "K"
  • "mol"
  • "cd"
  • "deg"
  • "rad"
  • "sr"
  • "Gy"
  • "Bq"
  • "degC"
  • "Sv"
  • "F"
  • "C"
  • "S"
  • "H"
  • "V"
  • "ohm"
  • "J"
  • "N"
  • "Hz"
  • "lx"
  • "lm"
  • "Wb"
  • "T"
  • "W"
  • "Pa"
  • "m2"
  • "m3"
  • "mPers"
  • "mPers2"
  • "m3Pers"
  • "mPerm3"
  • "kgm"
  • "kgPerm3"
  • "WPermK"
  • "JPerK"
  • "ppm"
  • "rotPers"
  • "radPers"
  • "VA"
  • "VAr"
  • "cosPhi"
  • "Vs"
  • "V2"
  • "As"
  • "A2"
  • "A2s"
  • "VAh"
  • "Wh"
  • "VArh"
  • "VPerHz"
  • "HzPers"
  • "character"
  • "charPers"
  • "kgm2"
  • "dB"
  • "WPers"
  • "lPers"
  • "dBm"
  • "h"
  • "min"
  • "Q"
  • "Qh"
  • "ohmm"
  • "APerm"
  • "V2h"
  • "A2h"
  • "Ah"
  • "count"
  • "ft3"
  • "m3Perh"
  • "gal"
  • "Btu"
  • "l"
  • "lPerh"
  • "lPerl"
  • "gPerg"
  • "molPerm3"
  • "molPermol"
  • "molPerkg"
  • "sPers"
  • "HzPerHz"
  • "VPerV"
  • "APerA"
  • "VPerVA"
  • "rev"
  • "kat"
  • "JPerkg"
  • "m3Uncompensated"
  • "m3Compensated"
  • "WPerW"
  • "therm"
  • "onePerm"
  • "m3Perkg"
  • "Pas"
  • "Nm"
  • "NPerm"
  • "radPers2"
  • "WPerm2"
  • "JPerkgK"
  • "JPerm3"
  • "VPerm"
  • "CPerm3"
  • "CPerm2"
  • "FPerm"
  • "HPerm"
  • "JPermol"
  • "JPermolK"
  • "CPerkg"
  • "GyPers"
  • "WPersr"
  • "WPerm2sr"
  • "katPerm3"
  • "d"
  • "anglemin"
  • "anglesec"
  • "ha"
  • "tonne"
  • "bar"
  • "mmHg"
  • "M"
  • "kn"
  • "Vh"
  • "Mx"
  • "G"
  • "Oe"
  • "WPerA"
  • "SPerm"
  • "onePerHz"
  • "VPerVAr"
  • "ohmPerm"
  • "kgPerJ"
  • "JPers"
  • "m2Pers"
  • "JPerm2"
  • "KPers"
  • "PaPers"

root TapChangerInfo.ctRating value
Type: number Default: null

nan

root TapChangerInfo.ptRatio
Type: number

Built-in voltage transducer ratio.

root TapChangerInfo.ratedApparentPower
Type: object or number

Rated apparent power.

root TapChangerInfo.ratedApparentPower multiplier
Type: enum (of string) Default: "none"

nan

Same definition as multiplier

root TapChangerInfo.ratedApparentPower unit
Type: enum (of string) Default: "VA"

nan

Same definition as unit

root TapChangerInfo.ratedApparentPower value
Type: number Default: null

nan

root TapChangerInfo.stepVoltageIncrement
Type: object or number

Tap step increment, in per cent of rated voltage, per step position.

root TapChangerInfo.stepVoltageIncrement multiplier
Type: enum (of string) Default: "none"

nan

Same definition as multiplier

root TapChangerInfo.stepVoltageIncrement unit
Type: enum (of string) Default: "none"

nan

Same definition as unit

root TapChangerInfo.stepVoltageIncrement value
Type: number Default: null

Normally 0 to 100 on a defined base.

root TapChangerInfo.stepPhaseIncrement
Type: object or number

Phase shift per step position.

root TapChangerInfo.stepPhaseIncrement multiplier
Type: enum (of string) Default: "none"

nan

Same definition as multiplier

root TapChangerInfo.stepPhaseIncrement unit
Type: enum (of string) Default: "deg"

nan

Same definition as unit

root TapChangerInfo.stepPhaseIncrement value
Type: number Default: null

nan

root TapChangerInfo.lowStep
Type: integer

Lowest possible tap step position, retard from neutral.

root TapChangerInfo.neutralU
Type: object or number

Voltage at which the winding operates at the neutral tap setting.

root TapChangerInfo.neutralU multiplier
Type: enum (of string) Default: "none"

nan

Same definition as multiplier

root TapChangerInfo.neutralU unit
Type: enum (of string) Default: "V"

nan

Same definition as unit

root TapChangerInfo.neutralU value
Type: number Default: null

nan

root TapChangerInfo.bil
Type: object or number

Basic Insulation Level (BIL) expressed as the impulse crest voltage of a nominal wave, typically 1.2 X 50 microsecond. This is a measure of the ability of the insulation to withstand very high voltage surges.

Same definition as TapChangerInfo.neutralU

root TapChangerInfo.ctRatio
Type: number

Built-in current transducer ratio.

root TapChangerInfo.isTcul
Type: boolean

Whether this tap changer has under load tap changing capabilities.

root TapChangerInfo.neutralStep
Type: integer

The neutral tap step position for the winding.

root TapChangerInfo.frequency
Type: object or number

Frequency at which the ratings apply.

root TapChangerInfo.frequency multiplier
Type: enum (of string) Default: "none"

nan

Same definition as multiplier

root TapChangerInfo.frequency unit
Type: enum (of string) Default: "Hz"

nan

Same definition as unit

root TapChangerInfo.frequency value
Type: number Default: null

nan

root IdentifiedObject.aliasName
Type: string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

root IdentifiedObject.mRID
Type: string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

root IdentifiedObject.name
Type: string

The name is any free human readable and possibly non unique text naming the object.