StartRampCurve

Type: object

Rate in gross active power per minute (Y-axis) at which a unit can be loaded versus the number of hours (X-axis) the unit was off line.

root Curve.CurveDatas
Type: array

Multi-purpose data points for defining a curve. The use of this generic class is discouraged if a more specific class can be used to specify the X and Y axis values along with their specific data types.

 No Additional Items

Each item of this array must be:

root Curve.CurveDatas CurveData.json
Type: object

Multi-purpose data points for defining a curve. The use of this generic class is discouraged if a more specific class can be used to specify the X and Y axis values along with their specific data types.

root Curve.CurveDatas CurveData CurveData.xvalue
Type: number

The data value of the X-axis variable, depending on the X-axis units.

root Curve.CurveDatas CurveData CurveData.y1value
Type: number

The data value of the first Y-axis variable, depending on the Y-axis units.

root Curve.CurveDatas CurveData CurveData.y2value
Type: number

The data value of the second Y-axis variable (if present), depending on the Y-axis units.

root Curve.CurveDatas CurveData CurveData.y3value
Type: number

The data value of the third Y-axis variable (if present), depending on the Y-axis units.

root Curve.CurveDatas CurveData DefaultBidCurveData.bidSegmentCalcType
Type: enum (of string)

Type of calculation basis used to define the default bid segment curve.

Must be one of:

  • "COST_BASED"
  • "LMP_BASED"
  • "NEGOTIATED"

root StartRampCurve.hotStandbyRamp
Type: object or number

The startup ramp rate in gross for a unit that is on hot standby.

root StartRampCurve.hotStandbyRamp multiplier
Type: enum (of string) Default: "none"

nan

Must be one of:

  • "p"
  • "n"
  • "micro"
  • "m"
  • "c"
  • "d"
  • "k"
  • "M"
  • "G"
  • "T"
  • "none"
  • "y"
  • "z"
  • "a"
  • "f"
  • "da"
  • "h"
  • "P"
  • "E"
  • "Z"
  • "Y"

root StartRampCurve.hotStandbyRamp unit
Type: enum (of string) Default: "WPers"

nan

Must be one of:

  • "none"
  • "m"
  • "kg"
  • "s"
  • "A"
  • "K"
  • "mol"
  • "cd"
  • "deg"
  • "rad"
  • "sr"
  • "Gy"
  • "Bq"
  • "degC"
  • "Sv"
  • "F"
  • "C"
  • "S"
  • "H"
  • "V"
  • "ohm"
  • "J"
  • "N"
  • "Hz"
  • "lx"
  • "lm"
  • "Wb"
  • "T"
  • "W"
  • "Pa"
  • "m2"
  • "m3"
  • "mPers"
  • "mPers2"
  • "m3Pers"
  • "mPerm3"
  • "kgm"
  • "kgPerm3"
  • "WPermK"
  • "JPerK"
  • "ppm"
  • "rotPers"
  • "radPers"
  • "VA"
  • "VAr"
  • "cosPhi"
  • "Vs"
  • "V2"
  • "As"
  • "A2"
  • "A2s"
  • "VAh"
  • "Wh"
  • "VArh"
  • "VPerHz"
  • "HzPers"
  • "character"
  • "charPers"
  • "kgm2"
  • "dB"
  • "WPers"
  • "lPers"
  • "dBm"
  • "h"
  • "min"
  • "Q"
  • "Qh"
  • "ohmm"
  • "APerm"
  • "V2h"
  • "A2h"
  • "Ah"
  • "count"
  • "ft3"
  • "m3Perh"
  • "gal"
  • "Btu"
  • "l"
  • "lPerh"
  • "lPerl"
  • "gPerg"
  • "molPerm3"
  • "molPermol"
  • "molPerkg"
  • "sPers"
  • "HzPerHz"
  • "VPerV"
  • "APerA"
  • "VPerVA"
  • "rev"
  • "kat"
  • "JPerkg"
  • "m3Uncompensated"
  • "m3Compensated"
  • "WPerW"
  • "therm"
  • "onePerm"
  • "m3Perkg"
  • "Pas"
  • "Nm"
  • "NPerm"
  • "radPers2"
  • "WPerm2"
  • "JPerkgK"
  • "JPerm3"
  • "VPerm"
  • "CPerm3"
  • "CPerm2"
  • "FPerm"
  • "HPerm"
  • "JPermol"
  • "JPermolK"
  • "CPerkg"
  • "GyPers"
  • "WPersr"
  • "WPerm2sr"
  • "katPerm3"
  • "d"
  • "anglemin"
  • "anglesec"
  • "ha"
  • "tonne"
  • "bar"
  • "mmHg"
  • "M"
  • "kn"
  • "Vh"
  • "Mx"
  • "G"
  • "Oe"
  • "WPerA"
  • "SPerm"
  • "onePerHz"
  • "VPerVAr"
  • "ohmPerm"
  • "kgPerJ"
  • "JPers"
  • "m2Pers"
  • "JPerm2"
  • "KPers"
  • "PaPers"

root StartRampCurve.hotStandbyRamp value
Type: number Default: null

nan

root Curve.curveStyle
Type: enum (of string)

The style or shape of the curve.

Must be one of:

  • "constantYValue"
  • "straightLineYValues"

root Curve.xMultiplier
Type: enum (of string)

Multiplier for X-axis.

Same definition as multiplier

root Curve.xUnit
Type: enum (of string)

The X-axis units of measure.

Same definition as unit

root Curve.y1Multiplier
Type: enum (of string)

Multiplier for Y1-axis.

Same definition as multiplier

root Curve.y1Unit
Type: enum (of string)

The Y1-axis units of measure.

Same definition as unit

root Curve.y2Multiplier
Type: enum (of string)

Multiplier for Y2-axis.

Same definition as multiplier

root Curve.y2Unit
Type: enum (of string)

The Y2-axis units of measure.

Same definition as unit

root Curve.y3Multiplier
Type: enum (of string)

Multiplier for Y3-axis.

Same definition as multiplier

root Curve.y3Unit
Type: enum (of string)

The Y3-axis units of measure.

Same definition as unit

root IdentifiedObject.description
Type: string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

root IdentifiedObject.aliasName
Type: string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

root IdentifiedObject.mRID
Type: string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

root IdentifiedObject.name
Type: string

The name is any free human readable and possibly non unique text naming the object.