PerLengthLineParameter

Type: object

Common type for per-length electrical catalogues describing line parameters.

root PerLengthImpedance
Type: object

Common type for per-length impedance electrical catalogues.

root PerLengthImpedance PerLengthSequenceImpedance
Type: object

Sequence impedance and admittance parameters per unit length, for transposed lines of 1, 2, or 3 phases. For 1-phase lines, define x=x0=xself. For 2-phase lines, define x=xs-xm and x0=xs+xm.

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.b0ch
Type: object or number

Zero sequence shunt (charging) susceptance, per unit of length.

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.b0ch multiplier
Type: enum (of string) Default: "none"

nan

Must be one of:

  • "p"
  • "n"
  • "micro"
  • "m"
  • "c"
  • "d"
  • "k"
  • "M"
  • "G"
  • "T"
  • "none"
  • "y"
  • "z"
  • "a"
  • "f"
  • "da"
  • "h"
  • "P"
  • "E"
  • "Z"
  • "Y"

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.b0ch unit
Type: enum (of string) Default: "SPerm"

nan

Must be one of:

  • "none"
  • "m"
  • "kg"
  • "s"
  • "A"
  • "K"
  • "mol"
  • "cd"
  • "deg"
  • "rad"
  • "sr"
  • "Gy"
  • "Bq"
  • "degC"
  • "Sv"
  • "F"
  • "C"
  • "S"
  • "H"
  • "V"
  • "ohm"
  • "J"
  • "N"
  • "Hz"
  • "lx"
  • "lm"
  • "Wb"
  • "T"
  • "W"
  • "Pa"
  • "m2"
  • "m3"
  • "mPers"
  • "mPers2"
  • "m3Pers"
  • "mPerm3"
  • "kgm"
  • "kgPerm3"
  • "WPermK"
  • "JPerK"
  • "ppm"
  • "rotPers"
  • "radPers"
  • "VA"
  • "VAr"
  • "cosPhi"
  • "Vs"
  • "V2"
  • "As"
  • "A2"
  • "A2s"
  • "VAh"
  • "Wh"
  • "VArh"
  • "VPerHz"
  • "HzPers"
  • "character"
  • "charPers"
  • "kgm2"
  • "dB"
  • "WPers"
  • "lPers"
  • "dBm"
  • "h"
  • "min"
  • "Q"
  • "Qh"
  • "ohmm"
  • "APerm"
  • "V2h"
  • "A2h"
  • "Ah"
  • "count"
  • "ft3"
  • "m3Perh"
  • "gal"
  • "Btu"
  • "l"
  • "lPerh"
  • "lPerl"
  • "gPerg"
  • "molPerm3"
  • "molPermol"
  • "molPerkg"
  • "sPers"
  • "HzPerHz"
  • "VPerV"
  • "APerA"
  • "VPerVA"
  • "rev"
  • "kat"
  • "JPerkg"
  • "m3Uncompensated"
  • "m3Compensated"
  • "WPerW"
  • "therm"
  • "onePerm"
  • "m3Perkg"
  • "Pas"
  • "Nm"
  • "NPerm"
  • "radPers2"
  • "WPerm2"
  • "JPerkgK"
  • "JPerm3"
  • "VPerm"
  • "CPerm3"
  • "CPerm2"
  • "FPerm"
  • "HPerm"
  • "JPermol"
  • "JPermolK"
  • "CPerkg"
  • "GyPers"
  • "WPersr"
  • "WPerm2sr"
  • "katPerm3"
  • "d"
  • "anglemin"
  • "anglesec"
  • "ha"
  • "tonne"
  • "bar"
  • "mmHg"
  • "M"
  • "kn"
  • "Vh"
  • "Mx"
  • "G"
  • "Oe"
  • "WPerA"
  • "SPerm"
  • "onePerHz"
  • "VPerVAr"
  • "ohmPerm"
  • "kgPerJ"
  • "JPers"
  • "m2Pers"
  • "JPerm2"
  • "KPers"
  • "PaPers"

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.bch
Type: object or number

Positive sequence shunt (charging) susceptance, per unit of length.

Same definition as PerLengthSequenceImpedance.b0ch

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.g0ch
Type: object or number

Zero sequence shunt (charging) conductance, per unit of length.

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.gch
Type: object or number

Positive sequence shunt (charging) conductance, per unit of length.

Same definition as PerLengthSequenceImpedance.g0ch

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.r
Type: object or number

Positive sequence series resistance, per unit of length.

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.r0
Type: object or number

Zero sequence series resistance, per unit of length.

Same definition as PerLengthSequenceImpedance.r

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.x
Type: object or number

Positive sequence series reactance, per unit of length.

root PerLengthImpedance PerLengthSequenceImpedance PerLengthSequenceImpedance.x0
Type: object or number

Zero sequence series reactance, per unit of length.

Same definition as PerLengthSequenceImpedance.x

root PerLengthImpedance PerLengthSequenceImpedance IdentifiedObject.description
Type: string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

root PerLengthImpedance PerLengthSequenceImpedance IdentifiedObject.aliasName
Type: string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

root PerLengthImpedance PerLengthSequenceImpedance IdentifiedObject.mRID
Type: string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

root PerLengthImpedance PerLengthSequenceImpedance IdentifiedObject.name
Type: string

The name is any free human readable and possibly non unique text naming the object.

root PerLengthImpedance PerLengthPhaseImpedance
Type: object

Impedance and admittance parameters per unit length for n-wire unbalanced lines, in matrix form.

root PerLengthImpedance PerLengthPhaseImpedance PerLengthPhaseImpedance.PhaseImpedanceData
Type: array

Impedance and conductance matrix element values.
The diagonal elements are described by the elements having the same toPhase and fromPhase value and the off diagonal elements have different toPhase and fromPhase values. The matrix can also be stored in symmetric lower triangular format using the row and column attributes, which map to ACLineSegmentPhase.sequenceNumber.

 No Additional Items

Each item of this array must be:

root PerLengthImpedance PerLengthPhaseImpedance PerLengthPhaseImpedance.PhaseImpedanceData PhaseImpedanceData.json
Type: object

Impedance and conductance matrix element values.
The diagonal elements are described by the elements having the same toPhase and fromPhase value and the off diagonal elements have different toPhase and fromPhase values. The matrix can also be stored in symmetric lower triangular format using the row and column attributes, which map to ACLineSegmentPhase.sequenceNumber.

root PerLengthImpedance PerLengthPhaseImpedance PerLengthPhaseImpedance.PhaseImpedanceData PhaseImpedanceData PhaseImpedanceData.fromPhase
Type: enum (of string)

Refer to the class description.

Must be one of:

  • "A"
  • "B"
  • "C"
  • "N"
  • "s1"
  • "s2"

root PerLengthImpedance PerLengthPhaseImpedance PerLengthPhaseImpedance.PhaseImpedanceData PhaseImpedanceData PhaseImpedanceData.row
Type: integer

The matrix element’s row number, in the range 1 to PerLengthPhaseImpedance.conductorCount. Only the lower triangle needs to be stored. This row number matches ACLineSegmentPhase.sequenceNumber.

root PerLengthImpedance PerLengthPhaseImpedance PerLengthPhaseImpedance.PhaseImpedanceData PhaseImpedanceData PhaseImpedanceData.column
Type: integer

The matrix element's column number, in the range 1 to row. Only the lower triangle needs to be stored. This column number matches ACLineSegmentPhase.sequenceNumber.

root PerLengthImpedance PerLengthPhaseImpedance PerLengthPhaseImpedance.conductorCount
Type: integer

Number of phase, neutral, and other wires retained. Constrains the number of matrix elements and the phase codes that can be used with this matrix.

root PerLengthImpedance PerLengthPhaseImpedance IdentifiedObject.description
Type: string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

root PerLengthImpedance PerLengthPhaseImpedance IdentifiedObject.aliasName
Type: string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

root PerLengthImpedance PerLengthPhaseImpedance IdentifiedObject.mRID
Type: string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

root PerLengthImpedance PerLengthPhaseImpedance IdentifiedObject.name
Type: string

The name is any free human readable and possibly non unique text naming the object.

root PerLengthDCLineParameter
Type: object

Common type for per-length electrical catalogues describing DC line parameters.

root PerLengthDCLineParameter PerLengthDCLineParameter.capacitance
Type: object or number

Capacitance per unit of length of the DC line segment; significant for cables only.

root PerLengthDCLineParameter PerLengthDCLineParameter.inductance
Type: object or number

Inductance per unit of length of the DC line segment.

root PerLengthDCLineParameter PerLengthDCLineParameter.resistance
Type: object or number

Resistance per length of the DC line segment.

Same definition as PerLengthSequenceImpedance.r

root PerLengthDCLineParameter IdentifiedObject.description
Type: string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

root PerLengthDCLineParameter IdentifiedObject.aliasName
Type: string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy.
The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

root PerLengthDCLineParameter IdentifiedObject.mRID
Type: string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended.
For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

root PerLengthDCLineParameter IdentifiedObject.name
Type: string

The name is any free human readable and possibly non unique text naming the object.